Configuration - Simplex

A Simplex configuration is a type of cabling arrangement commonly used in data centers and telecommunication networks. It consists of a single cable , terminated with a connector at each end. It is normally used in Half Duplex or Full Duplex data transmitions.

FO Connector Type 1 - SC

SC FO Connector is a type of fiber optic connector that uses a 2.5mm ceramic ferrule to align and connect optical fibers. Used in high-speed data communication networks. Provides low insertion loss and high return loss. The connector is easy to install and provides a secure, reliable connection for both single-mode and multimode fiber optic cables. Its locking mechanism ensures a stable connection and the push-pull design makes it easy to connect and disconnect. The SC connector is commonly used in data centers, telecommunication rooms, and other high-density fiber optic installations.

FO Polish Connector 1 - PC

PC (Physical Contact), is a type of polishing procedure that makes flat surfacein the ferrule end face. The optical return loss of PC connectors is >-40dB. PC connectors may only be mated with other PC or UPC connectors. It can be identified by the blue boot and is used in single-mode and multi-mode fibers. This polishing procedure is outdated and is replaced by UPC.

Fiber Mode - Single Mode (SM)

Single mode fiber uses a LASER light source, is a type of optical fiber with a small core diameter that allows only one mode of light to propagate. It is used in telecommunications and data transmission systems to transmit signals over long distances with low attenuation and high bandwidth. Single mode fiber is ideal for high-speed and long-distance applications, such as internet backbone networks, cable television networks, and fiber-to-the-home (FTTH) services. Its narrow core reduces the dispersion of light, allowing signals to travel further and faster than with multimode fiber.